Mapei Shower Waterproofing Kit

Each Kit Contains: 5KG Mapegum WPS Liquid Membrane, 10m Waterproof tape and 0.5KG of primer Coverage (m2): 4m2 Application Temperature Range: +5°C to +35°C  

Mapei Mapeker Rapid Set Flexi Grey 20kg

Suitable for Porcelain,Ceramic & Non Moisture Sensitive Natural Stone  Sets in 2-3 hours  Ready to Grout in 3 hours  Wall & Floors Suitable for Underfloor/Undertile Heating  Suitable for Rigid Plywood and Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply) Gypsum Plaster (When Primed with Mapei PrimerG) Plaster Boards, Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in White.

Mapei Mapeker Rapid-Set Flex Grey 20kg Pallet Deal-48 Bags

Rapid set single-part flexible adhesive for fixing all types of ceramic, porcelain tiles and mosaics and moisture stable natural stone. Suitable for plywood overlaid floors installed to Standard recommendations. Use with under tile heating encapsulated in a levelling compound. For internal and external use on walls and floors. Cured adhesive is water resistant and frost-proof. Suitable for showers, balconies, terraces and patios. COVERAGE: walls - approx. 2.5 kg/m2. floors - approx. 4 kg/m2 depending on substrate and back of tile.

Mapei Mapegum WPS 5KG

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.  

Mapei Mapegum WPS 10KG

Fast drying flexible liquid tanking membrane for the interior waterproofing of bathroom and shower walls and floors before installing ceramic tiles and natural stone. Fast drying flexible liquid membrane for waterproofing. WHERE TO USE Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Mapegum WPS may be used on the following: plasterboard, gypsum or cementitious render, lightweight cement block and marine-plywood; cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.