Weberset Rapid SPF White 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF White 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. Weber PR360 is normally recommended for most walls in dry areas. Weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

Gel-Tech Semi Rapid White 20kg

Suitable for ceramic, marble, stone, porcelain, mosaics, glass & large format tiles Contains 33% recycled raw materials Walk on & ready to grout in 24 hours Excellent initial grab & non-slip High yield thixotropic properties

Mapei Adesilex P9 Tile Adhesive White - 20kg

Mapei Adesilex P9 Tile Adhesive Grey - 20kg

Palace Trade-Flex One Part Flexible Rapid Set Adhesive White 20kg

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and it’s fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Mapei Ultraflex S2 Quick Grey 15kg

Mapei Mapeker Rapid Set Flexi White 20kg

Mapei - Mapeker Rapid-Set Flexi (White) 20kg  - Suitable for Porcelain, Ceramic & Non Moisture Sensitive Natural Stone- Sets in 2-3 hours- Ready to Grout in 3 hours- Wall & Floors- Suitable for Underfloor/Undertile Heating- Suitable for Rigid Plywoodand Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply)- Gypsum Plaster (When Primed with Mapei PrimerG)- Plaster Boards, - Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in Grey.

Mapei Keraquick Rapid Set Flexible Adhesive White 20kg

Mapei Keraquick Rapid Set Flexible Adhesive White 20kg This flexible and fast setting White Adhesive is suitable for Porcelain, Ceramic, Walls & Floors, Wooden Floors and Concrete Floors.  If you are using it with plywood and chipboard, mix it with Latex Plus.  Same Adhesive available in Grey.