Weberset Rapid SPF Grey 20kg

Weberset Rapid SPF is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use.  It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses: Fixing ceramic, porcelain and natural stone tiles: Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.

Weberset SPF Grey 20kg

Weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. Weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. Weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. Weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: Weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using Weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. weber pr360 is normally recommended for most walls in dry areas. weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm

CT1 Anthracite Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Anthracite Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

CT1 Grey Sealant and Construction Adhesive 290ml

Brand: CTEC Colour: Grey Material: A unique 'tribrid' polymer for sealing and adhesion Size (ml): 290ml Suitability: All metals (including lead), glass, mirrors, all woods, MDF, polystyrene, fibreglass, tiles, concrete, most stones (without staining), most synthetic materials and plastics (excluding PP, PR and PTFE)

Mapei AC Mapesil Silicone Sealant Medium Grey 310ml BOX

Mapei AC Mapesil Silicone Sealant Silver Grey 310ml BOX

Mapei Fuga Fresca Grout Joints Cement Grey 160g

FUGA FRESCA Easy to use grout refresher to rejuvenate the colour of cementitious grouted joints in floors and walls. May also be used to correct irregularities in colour due to incorrect grout application.Helps obtain a uniform colour which absorbs less water and is easier to clean. COVERAGE: depends on the size of the tiles and joints.Pool, Pathway And Commercial Area.    

Mapei Fuga Fresca Grout Joints London Grey 160g

FUGA FRESCA Easy to use grout refresher to rejuvenate the colour of cementitious grouted joints in floors and walls. May also be used to correct irregularities in colour due to incorrect grout application.Helps obtain a uniform colour which absorbs less water and is easier to clean. COVERAGE: depends on the size of the tiles and joints.Pool, Pathway And Commercial Area.    

Bostik ShowerProof Wall Tile Adhesive 15ltr

MAPEI ULTRAPLAN RENOVATION SCREED 25KG BAG

Mapei MapeGrip D1 Readymix Adhesive 15kg

Mapei - MapeGrip D1 Readymix Adhesive 15kg - High Initial Grab- Non-Slip- Covers up to 7.5m2 This Adhesive is suitable for installing most types of ceramic tiles onto gypsum plaster, plasterboard and fully cured concrete walls in bathrooms and kitchens.

Mapei MapeGrip D2 Readymix Adhesive 15kg

Fully water-resistant flexible dispersion adhesive for internal wall tiling with most ceramic tiles and mosaics. Non-slip and high grab. Suitable for commercial and domestic showers and wet areas.  - High Initial Grab - Non-Slip - Covers up to 7.5m2  

Palace Trade-Flex One Part Flexible Rapid Set Adhesive Grey 20kg

Trade-Flex White is recommended for fixing porcelain & vitrified tiles to solid surfaces, heated sub-floors and 15mm ply-wood overlay. It is available is particularly recommended when fixing mosaics, marble and light natural stone such as travertine and it’s fast setting properties allows grouting to proceed just 3 hours after it cures to a fully water-resistant high early strength bond which is suitable for interior / exterior use and locations which are frequently wet.

Palace Easi-Flex One Part Slow Set Adhesive Grey

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Mapei AC Mapesil Silicone Sealant Limestone 310ml

Mapei AC Mapesil Silicone Sealant Cement Grey 310ml

Mapei Mapeker Rapid Set Flexi Grey 20kg

Suitable for Porcelain,Ceramic & Non Moisture Sensitive Natural Stone  Sets in 2-3 hours  Ready to Grout in 3 hours  Wall & Floors Suitable for Underfloor/Undertile Heating  Suitable for Rigid Plywood and Overboarded Floors (Overboarded with A Minimum of 15 WBP Ply) Gypsum Plaster (When Primed with Mapei PrimerG) Plaster Boards, Internal & External Use Sets in 2-3 hours - Ready to Grout in 3 hours. Same Adhesive Available in White.

Mapei Ultracolor Plus Grey Grout 5kg

Mapei - Ultracolor Plus Grey Grout (113) 5kg   Suitable for: Wall, Floor, Interior, Exterior, Swimming Pool, Pathway And Commercial Area.     An exceptionally high performaning Grout, Very fast at drying and setting, It is Polymer Modified and Anti Efflorescence. Also Water Repelling for joints of 2mm to 20mm. With Drop Effect Technology, and Anti Mould with Biotech Technology, Suitable for most areas including those with heavy traffic, i.e - Airports, Shopping Centres And Swimming Pools.   

Mapei Ultracolor Plus Med Grey Grout 5kg

  

Mapei Keraquick Rapid Set Flexible Adhesive Grey 20kg

Mapei - Keraquick Rapid-Set Flexible Adhesive (Grey) 20kg  This flexible and fast setting Adhesive is suitable for Porcelain, Ceramic, Walls & Floors, Wooden Floors, Concrete Floors and Swimming Pools.  If you are using it with plywood and chipboard, mix it with Latex Plus. 1 Bag covers a average of 8m2 on walls and 5m2 on floors.  Same Adhesive available in White - Suitable For Porcelain Tiles And Underfloor Heating - Walls & Floors - Non Slip - Polymer Modified                                - Interior & Exterior

Mapei Fuga Fresca Grout Joints Anthracite 160g

FUGA FRESCA Easy to use grout refresher to rejuvenate the colour of cementitious grouted joints in floors and walls. May also be used to correct irregularities in colour due to incorrect grout application.Helps obtain a uniform colour which absorbs less water and is easier to clean. COVERAGE: depends on the size of the tiles and joints.Pool, Pathway And Commercial Area.    

Mapei Keraflex Extra S1 Grey Tile Adhesive 20KG

Colour: Grey Size (kg): 20kg BENEFITS AND FEATURES:  ▪ Dual consistency certification: thixotropic and fluid▪ No vertical slip▪ Excellent wetting capacity▪ Excellent adhesion▪ Deformable▪ Extended open time▪ Ideal for large-format tiles▪ With very low VOC emissions▪ Fully offset residual Greenhouse Gas emissions

Mapei Keraflex Extra S1 White Tile Adhesive 20KG

Colour: White Size (kg): 20kg BENEFITS AND FEATURES:  ▪ Dual consistency certification: thixotropic and fluid▪ No vertical slip▪ Excellent wetting capacity▪ Excellent adhesion▪ Deformable▪ Extended open time▪ Ideal for large-format tiles▪ With very low VOC emissions▪ Fully offset residual Greenhouse Gas emissions

Mapei Rapid Level CT 3220 20kg

Mapei Ultracolor Plus Yellow 150 Grout 5kg

A yellow tile grout sold in 5kg bags suitable for: walls, floors, interiors, exteriors, swimming pools, pathways and commercial areas.   An exceptionally high-performing yellow tile grout. Very fast at drying and setting, this grout is polymer modified and anti-efflorescence, as well as water repelling for joints of 2mm to 20mm. Thanks to its Drop Effect technology and Biotech technology, the grout is also highly mould-resistant. This Mapei Ultracolor Plus 150 Yellow tile grout is suitable for most areas including those with heavy traffic such as airports, shopping centres and swimming pools.

Mapei Ultracolor Plus Terra Di Sienna Grout 5kg

    Suitable for: Wall, Floor, Interior, Exterior, Swimming Pool, Pathway And Commercial Area.     An exceptionally high performaning Grout, Very fast at drying and setting, It is Polymer Modified and Anti Efflorescence. Also Water Repelling for joints of 2mm to 20mm. With Drop Effect Technology, and Anti Mould with Biotech Technology, Suitable for most areas including those with heavy traffic, i.e - Airports, Shopping Centres And Swimming Pools.   

Mapei Ultracare Fuga Fresca 111 Silver Grey 160g Grout Pen

Colour: Silver Grey Size (G): 160g Suitability: A ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of the cementitious grout joints between tiles. Used to eliminate irregularities in the colour of grout-joints The Technical Data Sheet for this item can also be found here *Note: Do not use for external applications or on surfaces subjected to continuous immersion (swimming pools, basins, etc.). 

Ultracare Fuga Fresca 110 Manhattan 2000 160g Grout Pen

Colour: Manhattan 2000 Size (G): 160g Suitability: A ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of the cementitious grout joints between tiles. Used to eliminate irregularities in the colour of grout-joints The Technical Data Sheet for this item can also be found here *Note: Do not use for external applications or on surfaces subjected to continuous immersion (swimming pools, basins, etc.). 

Mapei Fuga Fresca Grout Joints White 160g

FUGA FRESCA Easy to use grout refresher to rejuvenate the colour of cementitious grouted joints in floors and walls. May also be used to correct irregularities in colour due to incorrect grout application.Helps obtain a uniform colour which absorbs less water and is easier to clean. COVERAGE: depends on the size of the tiles and joints.Pool, Pathway And Commercial Area.    

Ultracare Fuga Fresca 112 Medium Grey 160g Grout Pen

Colour: Medium Grey Size (G): 160g Suitability: A ready-to-use paint for internal areas which is quickly and easily applied to rejuvinate, refresh and modify the colour of the cementitious grout joints between tiles. Used to eliminate irregularities in the colour of grout-joints The Technical Data Sheet for this item can also be found here *Note: Do not use for external applications or on surfaces subjected to continuous immersion (swimming pools, basins, etc.). 

Palace Easi-Flex One Part Slow Set Adhesive White 20KG

Palace Easi-flex is a standard (slow) setting cement based flexible tile adhesive, shown here in Grey. Use this adhesive to fix to any substrate but especially for use on areas where some movement can occur such as secured plywood, backer-board or timber panels.  This white tile adhesive is ideal for use with light coloured natural stone such as travertine and limestone to prevent shadowing and also for use on whitelight wall or floor tiles to prevent joint overspill showing through joints, also ideal for fixing glass tiles and prevent the adhesive showing through the backing. Easi-flex forms a strong bond with concrete, cement, concrete block-work and brickwork giving improved flexural strength, and also is suitable where under-floor heating is installed. It is sufficiently water-resistant to be suitable for interior / exterior use, in swimming pools and locations which are subject to persistent dampness, e.g. showers, saunas, wet rooms and bathrooms. The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel.

Palace Heat Resistant Adhesive - 10KG

PALACE Heat-Resist is a polymer-fortified heat-resistant tile adhesive, designed to provide a high-strength, durable bond in areas where tiles are installed around a radiant source of heat which does not reach temperatures in excess of 250°C. This is typical of conditions found around domestic installations such as a log burning fire, cooking range/stove or a traditional Aga Oven. This heat-resistant tile adhesive is a pale grey powder-based blend incorporating special hydraulic binders which produces a non-slump, fast-setting paste. The adhesive is suitable for fixing ceramic, porcelain and vitrified tiles in areas surrounding a radiant source of heat. PALACE Heat-Resist should only be used for fixing tiles onto solid masonry surfaces or cement board structures which are stable when exposed to high temperatures. Note: It is essential to confirm that all tiles selected for use in this type of location are similarly heat-resistant. Conforms to EN 12004 C2FT-S1 and should ideally be used with PALACE Colour-Lock Grout Fast-setting adhesive High early strength Polymer-fortified tile adhesive This heat-resistant tile adhesive can be exposed to temperatures up to 250°C For use around ovens, stoves & log burning fires