10 Litre Lightbuck Italiano Plastic Bucket
Features: Greater comfort during transport Makes waste collection easy Galvanized steel heavy-duty metal handle - reducing oxidation damage Walls reinforced with ribbing
10mm Broca Drygres Premium Drill Bit
RUBI Broca Drygres Premium Diamond Drill Bits are available in multiple sizes Size: 10mm Connection: M14 Threaded Connection (dry cut) Drilling Depth: 30mm Maximum Speed: 14000 RPM Suitability: Perfect for all types of tiles The average life of the drill bits always depends on the type of material, its thickness and correct cooling, and use. For a better finish and longer life of the bit, it is important to respect the correct turning speed and make a slight orbital movement throughout the drilling.
10mm x 10mm Stainless Steel Soft Grip Trowel
Material: Stainless Steel Size: 28cm Notches: 12mm x 12mm Available in 4 different sizes Features: Extremely light, high-resistance aluminium reinforcement The highly rigid joint between the reinforcement and the plate Steel plate special high wear resistance with corrosion protection by clear coat Stainless steel plate with special high wear resistance (INOX) Ergonomic RUBIFLEX handle with two textures Perfect flatness of the plate
120 Grit Diamond Polishing Pad
Grit: 120 Grit Size: 55mm x 90mm Use: Wet or Dry Ideal for edge grinding and polishing, great for getting to complicated areas Also available in 60 grit
12mm x 12mm Stainless Steel Soft Grip Trowel
Material: Stainless Steel Size: 28cm Notches: 12mm x 12mm Available in 4 different sizes Features: Extremely light, high-resistance aluminium reinforcement The highly rigid joint between the reinforcement and the plate Steel plate special high wear resistance with corrosion protection by clear coat Stainless steel plate with special high wear resistance (INOX) Ergonomic RUBIFLEX handle with two textures Perfect flatness of the plate
2-35mm Conical Diamond Superpro Drill Bit
Size: 2-35mm Connection: M14 Threaded Connection (dry cut) Maximum Drill Length: 35mm Maximum Speed: 11,000 RPM Also available in 20-48mm Diamond grinding bits are suitable for landscaping materials. Diamond grinding bits are NOT suitable for drilling holes.
20-48mm Conical Diamond Superpro Drill Bit
Size: 2-35mm Connection: M14 Threaded Connection (dry cut) Maximum Drill Length: 32mm Maximum Speed: 11,000 RPM Also available in 2-35mm Diamond grinding bits are suitable for landscaping materials. Diamond grinding bits are NOT suitable for drilling holes.
20mm Broca Drygres Premium Drill Bit
RUBI Broca Drygres Premium Diamond Drill Bits are available in multiple sizes Size: 20mm Connection: M14 Threaded Connection (dry cut) Drilling Depth: 30mm Maximum Speed: 14000 RPM Suitability: Perfect for all types of tiles The average life of the drill bits always depends on the type of material, its thickness and correct cooling, and use. For a better finish and longer life of the bit, it is important to respect the correct turning speed and make a slight orbital movement throughout the drilling.
22mm Extreme Plus Scoring Wheel
Recommended for scratching ceramic materials with smooth and structured surface finishes Material: High-Quality Tungsten Carbide Size: 22mm Compatible With: TX and TZ
Recommended for scratching ceramic materials with smooth and structured surface finishes Material: High-Quality Tungsten Carbide Size: 22mm Compatible With: TR Magnet, TS Max and Speed Magnet
28mm Broca Drygres Premium Drill Bit
RUBI Broca Drygres Premium Diamond Drill Bits are available in multiple sizes Size: 28mm Connection: M14 Threaded Connection (dry cut) Drilling Depth: 30mm Maximum Speed: 14000 RPM Suitability: Perfect for all types of tiles The average life of the drill bits always depends on the type of material, its thickness and correct cooling, and use. For a better finish and longer life of the bit, it is important to respect the correct turning speed and make a slight orbital movement throughout the drilling.
2mm Long Leg Cross Spacers 1000 Pcs
Colour: White Thickness (mm): 2mm N° of Pieces per Pack: 1000
Colour: Grey Thickness (mm): 2mm N° of Pieces per Pack: 300
Colour: White Thickness (mm): 3mm N° of Pieces per Pack: 1000
Colour: Grey Thickness (mm): 3mm N° of Pieces per Pack: 200
Grit: 60 Grit Size: 55mm x 90mm Use: Wet or Dry Ideal for edge grinding and polishing, great for getting to complicated areas Also available in 120 grit
6mm Broca Drygres Premium Drill Bit
RUBI Broca Drygres Premium Diamond Drill Bits are available in multiple sizes Size: 6mm Connection: M14 Threaded Connection (dry cut) Drilling Depth: 30mm Maximum Speed: 14000 RPM Suitability: Perfect for all types of tiles The average life of the drill bits always depends on the type of material, its thickness and correct cooling, and use. For a better finish and longer life of the bit, it is important to respect the correct turning speed and make a slight orbital movement throughout the drilling.
Recommended for scratching ceramic materials with smooth and structured surface finishes Material: High-Quality Tungsten Carbide Size: 6mm Compatible With: TS, TR, TF and Speed Cutters
6mm x 6mm Stainless Steel Soft Grip Trowel
Material: Stainless Steel Size: 28cm Notches: 6mm x 6mm Available in 4 different sizes Features: Extremely light, high-resistance aluminium reinforcement The highly rigid joint between the reinforcement and the plate Steel plate special high wear resistance with corrosion protection by clear coat Stainless steel plate with special high wear resistance (INOX) Ergonomic RUBIFLEX handle with two textures Perfect flatness of the plate
7mm Broca Drygres Premium Drill Bit
RUBI Broca Drygres Premium Diamond Drill Bits are available in multiple sizes Size: 7mm Connection: M14 Threaded Connection (dry cut) Drilling Depth: 30mm Maximum Speed: 14000 RPM Suitability: Perfect for all types of tiles The average life of the drill bits always depends on the type of material, its thickness and correct cooling, and use. For a better finish and longer life of the bit, it is important to respect the correct turning speed and make a slight orbital movement throughout the drilling.
8mm Broca Drygres Premium Drill Bit
RUBI Broca Drygres Premium Diamond Drill Bits are available in multiple sizes Size: 8mm Connection: M14 Threaded Connection (dry cut) Drilling Depth: 30mm Maximum Speed: 14000 RPM Suitability: Perfect for all types of tiles The average life of the drill bits always depends on the type of material, its thickness and correct cooling, and use. For a better finish and longer life of the bit, it is important to respect the correct turning speed and make a slight orbital movement throughout the drilling.
Recommended for scratching ceramic materials with smooth and structured surface finishes Material: High-Quality Tungsten Carbide Size: 8mm Suitability: TX, Y and TZ
Recommended for scratching ceramic materials with smooth and structured surface finishes Material: High-Quality Tungsten Carbide Size: 8mm Compatible With: TS, TR, TF and Speed Cutters
8mm x 8mm Stainless Steel Soft Grip Trowel
Material: Stainless Steel Size: 28cm Notches: 8mm x 8mm Available in 4 different sizes Features: Extremely light, high-resistance aluminium reinforcement The highly rigid joint between the reinforcement and the plate Steel plate special high wear resistance with corrosion protection by clear coat Stainless steel plate with special high wear resistance (INOX) Ergonomic RUBIFLEX handle with two textures Perfect flatness of the plate
Adder 115mm EXT Superpro Turbo Diamond Blade
Specifically designed for cutting landscaping materials Size: 115mm Thickness: 1.4mm Maximum Speed: 12250 RPM Suitability: For cutting all types of hard materials (eg. granite, rustic stoneware, slate and porcelain stoneware) Recommended for: Dry Cutting tiles 20mm+ thick
A great solution for rectifying ceramic tile cuts, especially glazed tiles and stoneware. This tool has a Tungsten Carbide edge, with an ergonomic and comfortable handle, for extra durability.
Cyclone Flat Base Spin 1.5mm Levelling System 100 Pcs
Colour: White Size: 1.5mm N° of Pieces per Pack: 100 Also available in 5mm
Cyclone Flat Base Spin 2mm Levelling System 100 Pcs
Colour: White Size: 2mm N° of Pieces per Pack: 100 Also available in 5mm
Cyclone Flat Base Spin 5mm Levelling System 100 Pcs
Colour: White Size: 5mm N° of Pieces per Pack: 100 Also available in 1.5mm
Cyclone Levelling System Caps 100 Pcs
N° of Pieces per Pack: 100
Cylindrical Superpro 10mm Diamond Drill Bit
Size: 10mm Connection: M14 Threaded Connection (dry cut) Maximum Drill Length: 55mm Maximum Speed: 11,000 RPM Also available in 20mm Diamond grinding bits are suitable for landscaping materials. Diamond grinding bits are NOT suitable for drilling holes.
Cylindrical Superpro 20mm Diamond Drill Bit
Size: 20mm Connection: M14 Threaded Connection (dry cut) Maximum Drill Length: 55mm Maximum Speed: 11,000 RPM Also available in 10mm Diamond grinding bits are suitable for landscaping materials. Diamond grinding bits are NOT suitable for drilling holes.
DC-250 Smart Advance 1200 Tile Cutter (110v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Reinforced aluminium chassis and steel fronts Size (cm): 100cm x 48cm x 85cm Cutting length (cm): 108cm Cutting length with saw effect (cm): 121cm Diagonal cutting length (cm): 85cm x 85cm Maximum cutting thickness (mm): 58-88mm Mitre thickness cut (mm): 55mm Inner diameter (mm): 25.4mm Outside diameter (mm): 250mm Power supply (v/hz): 110v - 50hz (Also available in 230v - 50hz) Revolutions (RPM): 2790 RPM Suitability: For wet cuts, ideal for cutting all kinds of ceramic tiles, porcelain tiles and other materials. Features: Two cutting modes, manual and automatic Intelligent automatic advance with electronic control to adapt the engine to the blade, material type and thickness Improved blade performance where the machine adapts to the blade's needs for the best cut possible and to extend the life of the blade
DC-250 Smart Advance 1200 Tile Cutter (230v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Reinforced aluminium chassis and steel fronts Size (cm): 100cm x 48cm x 85cm Cutting length (cm): 108cm Cutting length with saw effect (cm): 121cm Diagonal cutting length (cm): 85cm x 85cm Maximum cutting thickness (mm): 58-88mm Mitre thickness cut (mm): 55mm Inner diameter (mm): 25.4mm Outside diameter (mm): 250mm Power supply (v/hz): 230v - 50hz (Also available in 110v - 50hz) Revolutions (RPM): 2790 RPM Suitability: For wet cuts, ideal for cutting all kinds of ceramic tiles, porcelain tiles and other materials. Features: Two cutting modes, manual and automatic Intelligent automatic advance with electronic control to adapt the engine to the blade, material type and thickness Improved blade performance where the machine adapts to the blade's needs for the best cut possible and to extend the life of the blade
DCX-250 Xpert 1250 Tile Cutter (110v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Reinforced aluminium chassis and steel fronts Size (cm): 192cm x 74cm x 130cm Cutting length (cm): 125cm Cutting length with saw effect (cm): 133cm Diagonal cutting length (cm): 90cm x 90cm Maximum cutting thickness (mm): 60/90mm Mitre thickness cut (mm): 50mm Inside diameter (mm): 25.4mm Outside diameter (mm): 250mm Power supply (v/hz): 110v - 50hz (Also available in 230v - 50hz) Revolutions (RPM): 2750 RPM Suitability: For wet cutting, recommended for intensive cutting of porcelain stoneware tiles, and any other type of ceramic tile, while allowing the occasional cutting of natural stone pieces. Features: Reinforced aluminium chassis with innovative triple beam system and steel sides, improving the stability and rigidity of the chassis Reinforced cutting guide for a better cut finish C3-Python System increases cooling efficiency, ensures easy cleaning of the blade and reduces water dispersion High-performance plunge effect for height adjustment
DCX-250 Xpert 1250 Tile Cutter (230v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Reinforced aluminium chassis and steel fronts Size (cm): 192cm x 74cm x 130cm Cutting length (cm): 125cm Cutting length with saw effect (cm): 133cm Diagonal cutting length (cm): 90cm x 90cm Maximum cutting thickness (mm): 60/90mm Mitre thickness cut (mm): 50mm Inside diameter (mm): 25.4mm Outside diameter (mm): 250mm Power supply (v/hz): 230v - 50hz (Also available in 110v - 50hz) Revolutions (RPM): 2750 RPM Suitability: For wet cutting, recommended for intensive cutting of porcelain stoneware tiles, and any other type of ceramic tile, while allowing the occasional cutting of natural stone pieces. Features: Reinforced aluminium chassis with innovative triple beam system and steel sides, improving the stability and rigidity of the chassis Reinforced cutting guide for a better cut finish C3-Python System increases cooling efficiency, ensures easy cleaning of the blade and reduces water dispersion High-performance plunge effect for height adjustment
Delta Tile Levelling System 1.5mm Short Clips 200 Pcs
Colour: White/Clear Size: 1.5mm N° of Pieces per Pack: 200 Also available in 2mm
Delta Tile Levelling System 2mm Short Clips 200 Pcs
Colour: Black Size: 2mm N° of Pieces per Pack: 200 Also available in 1.5mm
DL-125 1200 Tile Cutter (220/240v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Aluminium Size (cm): 177cm x 47cm x 131cm Cutting length (cm): 124cm Cutting length with saw effect (cm): 133cm Diagonal cutting length (cm): 90cm x 90cm Maximum cutting thickness (mm): 30-50mm Mitre thickness cut (mm): 20mm Inside diameter (mm): 22.2mm Outside diameter (mm): 115-130mm Power supply (v/hz): 220/240v 50-60hz Revolutions (RPM): 12,000 RPM Suitability: For wet cutting, ideal for intensive cutting of porcelain and all kinds of ceramic tiles. Occasional cut of natural stone. Features: Combines power (2.4hp motor) and portability (only 48kg), making it ideal for jobs where space is limited Includes the zero dust system to ensure a safe working environment Compact and powerful Note: The machine is supplied without cable.
DT-250 MAX Tile Cutter (110-130v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Aluminium table with rubber surfaces and steel supports Size (cm): 160cm x 95.5cm x 123cm Cutting length (cm): 90cm Diagonal cutting length (cm): 60cm Cutting height (cm): 9cm Mitre thickness cut (mm): 20mm Inside diameter (mm): 25.4mm Outside diameter (mm): 250mm Power supply (v/hz): 110/130v - 50/60hz (Also available in 220/240v - 50/60hz) Revolutions (RPM): 4000 RPM Suitability: For wet cutting, ideal for ceramic floors and walls, including porcelain stoneware and other materials. Features: Advanced water management, with a tank of up to 19l Includes the zero dust system to ensure a safe working environment C3-Python System increases cooling efficiency, ensures easy cleaning of the blade and reduces water dispersion Compact and powerful
DT-250 MAX Tile Cutter (220-240v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Colour: Red and Black Material: Aluminium table with rubber surfaces and steel supports Size (cm): 160cm x 95.5cm x 123cm Cutting length (cm): 90cm Diagonal cutting length (cm): 60cm Cutting height (cm): 9cm Mitre thickness cut (mm): 20mm Inside diameter (mm): 25.4mm Outside diameter (mm): 250mm Power supply (v/hz): 220/240v 50-60hz (Also available in 110/130v - 50/60hz) Revolutions (RPM): 4000 RPM Suitability: For wet cutting, ideal for ceramic floors and walls, including porcelain stoneware and other materials. Features: Advanced water management, with a tank of up to 19l Includes the zero dust system to ensure a safe working environment C3-Python System increases cooling efficiency, ensures easy cleaning of the blade and reduces water dispersion Compact and powerful
Extension Power Cable for DCX-250 Xpert 1250 Tile Cutter (110v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Size (cm): 350cm (approximately) Power supply (v/hz): 110v - 50hz (Also available in 230v - 50hz) Suitability: This is the extension power cable for product ID BCT21798
Extension Power Cable for DCX-250 Xpert 1250 Tile Cutter (230v)
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Size (cm): 350cm (approximately) Power supply (v/hz): 230v - 50hz (Also available in 110v - 50hz) Suitability: This is the extension power cable for product ID BCT21797
Mini Viper-TVA 85mm Superpro Turbo Diamond Blade
General Purpose Diamond Blade Size: 85mm Thickness: 1.5mm Maximum Speed: 19000 RPM Suitability: For cutting all types of hard materials (eg. granite, rustic stoneware, slate and porcelain stoneware) Recommended for: Dry Cutting Note: Not suitable for mitre cuts (on disks less than 2mm thick) and may not be suitable for use on 20mm porcelain
Table Extension for DT-250 MAX Tile Cutter
Please note, this is sent direct from the supplier so the delivery timescale is 3-5 working days Size (cm): Extends the cutting capacity up to 120cm Suitability: This is the table extension for product IDs BCT21803 and BCT21804
Tile Levelling System Delta Wedge 100 Pcs
Colour: Black N° of Pieces per Pack: 100
Features: High-precision scratching Great efficiency Reinforced components High separation power (1,200KG) Operatable with one hand Note: Cutting tiles thicker than 15mm isn't always possible using a manual cutter. For tiles thicker than 15mm, a wet saw should be considered.